Guyed towers
Advantages
For all types of projects
Suitable for high-load sites
Global service
The widest range of towers on the market
At ESTUDENER, we offer an extensive selection of guyed tower models, designed and developed to provide solutions for all types of projects—from small, lightweight structures for weather stations or antennas to towers up to 200 meters high for sites with demanding load conditions.
Custom-made towers
Every structure is adapted to the specific conditions of the project—height, load, terrain, or applicable standards—always ensuring the highest levels of quality, safety, and durability.
Our engineering team works closely with each client to develop customized solutions, optimizing design, weight, and cost without compromising structural reliability.
Accessories and guying systems
We supply a full range of accessories and guying elements: wire ropes, turnbuckles, anchors, and complementary components.
By default, all components are manufactured in galvanized steel, with stainless-steel options available for marine environments or highly corrosive areas.
Every detail is designed to facilitate assembly, enhance safety, and ensure reliable performance throughout the entire service life of the tower.
COMMITMENT
Smart solutions for any site
Our guyed tower models are engineered to be installed without the need for cranes, enabling assembly in hard-to-access areas and significantly reducing logistical and installation costs.
This key advantage reflects our commitment to efficiency, safety, and practicality in the field.
Thinking ahead: Sustainability and dnvironmental care
At Estudener, we develop certified anchor systems that allow installation without concrete, minimizing environmental impact and enabling full site restoration after dismantling.
A cleaner, reversible solution aligned with the sustainability goals that are shaping the future of energy and responsible engineering.
Our current models
TOWERS
SL25 — Compact, lightweight and versatile
Designed for low-height towers, the SL25 is the ideal solution for meteorological stations, antennas or low-weight applications.
It is available with two different heights of intermediate section and two different top-section heights, with bolted-disk connections that ensure simple and precise assembly.
MODEL SL25
SL25-T25
Weight: 13 kg
Finishes:
Galvanized
Galvanized + Red Paint
Galvanized + White Paint
SL25-T15
Weight: 8 kg
Finishes:
Galvanized
Galvanized + Red Paint
Galvanized + White Paint
SL25-P25
Weight: 12 kg
Finishes:
Galvanized
Galvanized + Red Paint
SL25-P15
Weight: 6 kg
Finishes:
Galvanized
Galvanized + Red Paint
SL25-ABA
Dimensions: 280×280
Weight: 10 kg
Finishes: Galvanized
SL25-PLN
Dimensions: 280×280
Weight: 5 kg
Finishes: Galvanized
Sección
Leg: structural tube
Lattice: solid round bar
Joint: bolted disk
LT47+ — Efficiency and reliability
The LT47+ is an optimized model for heights of up to 120 meters and moderate load conditions.
Its single-section design and rapid sleeve-and-pin connection system enable fast and cost-effective assembly while maintaining an excellent balance between strength, weight, and cost.
A widely used option thanks to its combination of efficiency and reliability.
MODEL LT47+
LT47+0412
Weight: 66 kg
Finishes:
Galvanized
Galvanized + Red Paint
Galvanized + White Paint
LT47+P30
Weight: 60 kg
Finishes:
Galvanized
Galvanized + Red Paint
LT47+P20
Weight: 41 kg
Finishes:
Galvanized
Galvanized + Red Paint
LT47+P10
Weight: 22 kg
Finishes:
Galvanized
Galvanized + Red Paint
LT47+ABA
Dimensions: 1250×1250
Weight: 134 kg
Finishes: Galvanized
LT47+ABA-XL
Dimensions: 1500×1500
Weight: 158 kg
Finishes: Galvanized
Sección
Leg: structural tube
Lattice: solid round bar
Joint: leg-sleeve with pins
LT47R — Robustness for medium and high loads
The LT47R model offers a reinforced structure that allows it to handle projects with medium or high load requirements while remaining fully compatible with the LT47+ tower sections.
This combination makes it possible to optimize each tower according to the specific conditions of the site.
It uses rapid sleeve-and-pin connections that facilitate assembly and ensure precision.
MODEL LT47R
LTRS-5012
Weight: 95 kg
Finishes:
Galvanized
Galvanized + Red Paint
Galvanized + White Paint
LTRU-5012
Weight: 102 kg
Finishes:
Galvanized
Galvanized + Red Paint
Galvanized + White Paint
LTR-PLN
Dimensions: 1500×1500
Weight: 183 kg
Finishes: Galvanized
LTR-PLN-XL
Dimensions: 2000×2000
Weight: 245 kg
Finishes: Galvanized
Sección
Leg: structural tube
Lattice: solid round bar
Joint: leg-sleeve with pins
MD47 — Flexibility and precision
The MD47 offers strength equivalent to the LT47R, but uses a bolted connection system.
It includes several section types with different strength levels and solid legs of various diameters, allowing the structure to be adapted to the load and wind conditions of each project.
A versatile and robust option, ideal for demanding projects that require flexibility in design.
MODEL MD47
MD47-XX10
Weight MD47-2210: 57 kg
Weight MD47-2410: 63 kg
Weight MD47-2610: 68 kg
Weight MD47-2810: 75 kg
Finishes:
Galvanized
Galvanized + Red Paint
Galvanized + White Paint
MD47-P30
Weight: 52 kg
Finishes:
Galvanized
Galvanized + Red Paint
MD47-P20
Weight: 26 kg
Finishes:
Galvanized
Galvanized + Red Paint
MD47-P10
Weight: 20 kg
Finishes:
Galvanized
Galvanized + Red Paint
MD47-PLN
Dimensions: 1250×1250
Weight: 103 kg
MD47-PLN-XL
Dimensions: 1500×1500
Weight: 190 kg
Sección
Leg: solid round bar
Lattice: solid round bar
Joint: bolted disks
HD57 — Structural strength for great heights
The HD57 model is designed to withstand high loads and reach heights of up to 164 meters.
It features several section types with different strength levels and solid round legs in various diameters, providing the optimal solution for each site.
Its bolted flange connections deliver maximum rigidity and durability, even under adverse conditions.
MODEL HD57
HD57-XXY
Weight HD57-3012: 89 kg
Weight HD57-3512: 100 kg
Weight HD57-4012: 129 kg
Weight HD57-4512: 155 kg
Weight HD57-5014: 170 kg
Weight HD57-5514: 197 kg
Weight HD57-6014: 231 kg
Weight HD57-6514: 269 kg
Finishes:
Galvanized
Galvanized + Red Paint
Galvanized + White Paint
HD57-P30
Weight: 65 kg
Finishes:
Galvanized
Galvanized + Red Paint
HD57-P20
Weight: 37 kg
Finishes:
Galvanized
Galvanized + Red Paint
HD57-P10
Weight: 27 kg
Finishes:
Galvanized
Galvanized + Red Paint
HD57-PLN
Dimensions: 1500×1500
Weight: 190 kg
HD57-PLN-XL
Dimensions: 2000×2000
Weight: 255 kg
Sección
Leg: solid round bar
Lattice: solid round bar
Joint: bolted disks
COMING SOON
XH87 — Maximum resistance for extreme conditions
The XH87 represents the highest level of robustness within our product range.
Designed for heights of up to 200 meters and extreme load conditions, it combines sections with different strength levels and tubular legs in various profiles.
MODEL XH87
Its bolted flange-connection system ensures stability and safety in the most demanding environments.
As this model is intended for complex projects, each tower is calculated specifically for its site, optimizing the profiles used at every height.
It can be designed in 2- or 3-meter sections to adapt the weight to the installation requirements.
Discover our product range
Looking for a reliable guyed-tower solution?
Our guyed towers combine strength, optimized installation, and sustainable options for any site.